Hide menu

Final Program

9th MODPROD Workshop on Model-Based Product Development

Linköping University  –  www.modprod.liu.se  –  February 3-4, 2015

Organizers: Peter Fritzson, Petter Krus, Kristian Sandahl

Note: public versions of the presentations will be put on-line on the web after the Workshop

 

MODPROD Program for Tuesday February 3, Tutorials and Workshop


08.00-08.25     MODPROD bus from City Center, Stora Torget bus stop, to Linköping University Building A

08.30-09.00     Registration and coffee outside room A2, in Building A, Linköping University

09.00-10.45     Tutorials in Parallel, Length 3:15h

Tutorial 1: Peter Fritzson and Mahder Gebremedhin, Linköping University, Sweden. “Introduction to
Object Oriented Modeling and Simulation with Modelica using OpenModelica
”. Hands-on Exercises bring
your laptop.

Tutorial 2: Kristian Sandahl, Linköping University, Sweden.  A. “Modeling of Software Processes”.
B. Essence Kernel.

Tutorial 3: Marc Bouissou, EDF, France, and Lena Buffoni, Linköping University, Sweden. “Fault Modeling
and Fault Traceability
”. Hands-on with OpenModelica and Figaro.

Tutorial 4: Willi Braun, FH Bielefeld, Germany, Petter Krus, Linköping University, Sweden, Dag Fritzson,
SKF, Sweden, Adeel Asghar, Alachew Shitahun and Robert Braun Linköping, University, Sweden. ”
FMI 2.0 Model Exchange, Co-simulation, and TLM Co-Simulation – Theory and Practice”. Hands-on with OpenModelica and HOPSAN.

Tutorial 5: Martin Sjölund, Adeel Asghar, Linköping University, Sweden.  Vitalij Ruge, Lennart Ochel, and
Willi Braun, FH Bielefeld, Germany. “
Debugging Equation-Based Modelica Models; Dynamic Optimization
with OpenModelica
”. Hands-on Exercises with OpenModelica, bring your laptop.

Tutorial 6: Malte Lenz, Wolfram MathCore, Sweden. “Wolfram SystemModeler and Mathematica: Analysis
and Model Design
”.
Hands-on tutorial using Wolfram System Modeler and Mathematica, bring your laptop.


10.45-11.00     Coffee break


11.00-12.30     Tutorials continued, same rooms as above


12.30-13.30     Lunch at Restaurant Kårallen, Linköping University


13.30-14.20     Plenary Session 1, Model-Based Engineering, Session Chair: Kristian Sandahl, room A2

                        Keynote, Francis Bordeleau. Product Manager SW Development, Ericsson.Open Source Modeling — Main
                         Motivations and Key Challenges!

14.20-15.00    Peter Fritzson, Martin Sjölund; Petter Krus, Linköping University, Sweden, Presentation of Research at the
                        Centre for Model based Product Development, MODPROD


15.30-16.00    Coffee break, Poster Session and exhibition


16.00-17.15     Parallel Session 2a, Model-Based Engineering, Session Chair: Kristian Sandahl, room A2

John Baras, University of Maryland, College Park, USA. “A Framework for Model-Based Systems Engineering
for CPS with Emphasis on Design Space Exploration Methods and Tools

Ulf Olsson, Toni Siljamäki, Ericsson, Sweden, “Experience of Network Modeling Using Papyrus Open Source

Lena Buffoni, Linköping University, Sweden, and Marc Bouissou, EDF France. “Fault Tolerance Analysis using
OpenModelica with Figaro Extensions for Modelica”

Hans Georg Schaathun et al, Ålesund University College, Norway. "Virtual Prototypes on the Web"


16.00-17.15    Parallel Session 2b, Model-Based Software and Systems Engineering, Chair: Petter Krus, room ACAS

Wladimir Schamai, Airbus Group, Germany, Lena Buffoni, Peter Fritzson, Linköping University, Sweden, Daniel
Bouskela, EDF, France. Automating Model Composition for Design Verification

Roland Almgren, Knowit AB, Sweden. “Configuration Space Semantics”

Ingo Staack, Linköping University, Sweden. “Knowledge-Based Engineering for System Design of Aircraft Systems”

Klaas Gadeyne et al, FMTC, Belgium. "Optimal, Interdisciplinary Hybrid Drivelin Design"


17.30              Bus to Norrköping Visualization Center


18.45              Dome Visualization Demonstration, Workshop Dinner, bus back to Linköping at approx. 9 o’clock


 

MODPROD Program for Wednesday February 4


07.50-08.10    MODPROD Bus from Stora torget Bus Stop to Linköping University, Building A

08.00-08.30    Registration outside room A2, Building A, Linköping university

08.30-08.40    Workshop 2nd Day, Introduction, Plenary Session 3. Chair: Peter Fritzson, room A2

08.40-09.40    Keynote, Sébastien Gérard, Head of the LISE labs and leader of the Eclipse Papyrus project, France,Model-
                       Driven Engineering: Authoring and Exploiting Models

09.40-10.40    Keynote, Kannan Moudgalya, Prof. at IIT Mumbay, India, and head of spoken-tutorial.org project.Massive
                        Online Teaching of Programming and Simulation Using Open Source


10.40-11.30    Coffee, Posters and Exhibition


11.30-12.20    Parallel Session 3a, Modeling Languages. Chair: Kristian Sandahl, room A2

Lena Buffoni, Linköping University, Martin Otter, DLR, Wladimir Schamai, Airbus Group, Peter Fritzson, Linköping
University. “Requirement Formalization in Modelica”

Timothy Bourke, Albert Benveniste, Benoit Caillaud, Marc Pouzet, IRISA / INRIA, Rennes, France. “Exploiting
and Extending Synchronous Languages for Hybrid Modeling”


11.30-12.20     Parallel Session 3b, Numerical Aspects of Model-Based Engineering. Chair: Petter Krus, room A2

                        Dirk Scharff and Thilo Moshagen, TLK Thermo, Michaela Huhn, TU Clausthal. Germany. “Smooth Balance-
                        Corrective Contributions in Co-simulation”

                        Robert Braun, Linköping University, “Decoupling Distributed Solvers for an Equation-Based Modelling
                          Laguage


12.20-13.30     Lunch at Restaurant Kårallen, Linköping University.  Posters and Exhibition outside room A2


13.30-14.25     Keynote, Claude Gomez, CEO at Scilab Enterprises, France. “Why using Scilab Open Source Software for
                        Numerical Computation in Model-Based Development?”
Chair: Petter Krus, room:A2


14.25-14.55     Coffee, Posters and Exhibition


14.55-16.35     Parallel Session 4a, Model-Based Engineering and Applications. Chair: Petter Krus, room A2

Sune Horkeby, Siemens Industrial Turbomachinery AB, Sweden. “Collaboration Process in System Delivery”

Åke Kinnander, Siemens Industrial Turbomachinery AB, Sweden. Numerically Robust Approaches for Temperature Modeling in Heat Exchangers”

Francisco J. Gómez, Luigi Vanfretti, Svein Harald Olsen, KTH – Royal Institute of Technology, Sweden. “CIM To
Modelica Factory - Automated Modelica Model Generation and Time Domain Simulation from CIM”

Gaël Blondelle, Eclipse Foundation, France. “Open source perspectives for MBSE with PolarSys”


14.55-16.35     Parallel Session 4b, Model-Based Design and Development. Chair: Kristian Sandahl, room ACAS

Gunnar Nilsson, Ericsson, Sweden. “Open Source Strategies in Industrial Usage at Ericsson

Bernhard Thiele, Linköping University, Sweden. “A Proposal for Verified Code Generation from Modelica”

Peter Gorm Larsen, Aarhus University, Denmark. “Towards Comprehensive Cyber-Physical Systems
Simulation using Co-Simulation”

Stephan Rudolph, Universität Stuttgart. Germany “On graph-based design languages for consistent multidisciplinary models”


16.35-16.40     Break


16.40-17.15     Panel Discussion, Open Source in Industry, (plenary session), room A2 


17.30               MODPROD Bus from Linköping University Building A to City Center, Stora Torget bus stop


 


Page manager: peter.fritzson@liu.se
Last updated: Fri Feb 20 15:02:18 CET 2015